A Class Act
Lynda, Thank you for all you do. You and your company are a class act. Every time I need something, you come through. I really appreciate all you do. Thanks again!
Brad Weiss
Modern Escape
Timber Frame Package / Hybrid Package
Log Wall Package
- Kiln-dried, precut, pre-drilled, Engineered or Traditional Eastern White Pine log walls
- Kiln-dried, precut, pre-drilled, Engineered or Traditional Eastern White Pine log gables / dormers
- Kiln-dried, Eastern White Pine log siding for exterior framed walls / gables / dormers / garages
- Kiln-dried, Eastern White Pine log siding skirtboard
- Kiln-dried, Eastern White Pine solid corner trim
- Kiln-dried, precut, Engineered or Traditional Eastern White Pine 6×6/8×8 corner and log wall support posts
Timber Frame / Hybrid Package
Kiln-dried, precut, Engineered or Traditional timbers -Eastern White Pine
Structural Timber Frame System
- 6×6/6×8/8×8 angle braces, corner, dormer & support posts
- 6×12/8×12 timber frame beams
- 6×12/8×12/Glu-lam (as required) loft support beams
- 6×8/8×8/6×12 loft joists / loft ties / collar ties
- 4×12/6×8/6×12/8×8/8×12 rafters / timber trusses / purlins
- 4×12/6×12/8×12/Glu-lam (as required) ridge beams / hip / valley
- 6×8/6×12 chimney / skylight framing members
Hybrid Timber Frame System
- 4×8/6×6/6×8/8×8 angle braces, corner, dormer & support posts
- 6×8/8×8 frame beams
- 6×12/8×12/Glu-lam (as required) loft support beams
- 4×8/6×8/8×8/6×12 loft ties / collar ties
- 4×8/4×12/6×8/8×8/6×12 rafters / timber trusses
- 4×12/6×12/Glu-lam (as required) ridge beams / hip / valley
First-Level Floor Materials
- 4×10 Engineered Eastern White Pine perimeter box
Second-Level Floor System
- 6×6/8×8 support posts
- 6×12/8×12/Glu-lam (as required) loft support beams
- 6×8/8×8/6×12 loft joists / loft ties
Heavy Timber / Conventional Roof System
- 6×6/6×8/8×8 support posts
- 4×12/6×8/6×12/8×8/8×12 rafters / collar ties / timber trusses / purlins / exposed ceiling beams
- 4×12/6×12/8×12/Glu-lam (as required) ridge beams / hip / valley
- 6×8/6×12 chimney / skylight framing members
Exterior Porch / Deck / Balcony
- 6×8/8×8/6×12 porch headers
- 4×8/6×8 porch rafters
Fasteners / Miscellaneous
- 1” diameter round oak pegs
- Lag Bolts / Timber Screws (as applicable)
- Steel gusset plates, angle braces, bolts, Lags, nuts, washers (post & beam)
- Butylog sealant tape
- Caulking, gaskets, chinking
- Blueprints, Construction manual
Weather-Tight Package
Conventional First-Level Floor Materials
- PT 2x sill plate and sill seal
- (2) 2x perimeter band / 2x floor joists
- (4) 2×12 girder beams
- PT 6×6 girder support posts
- Metal joist hangers, bridging, construction adhesive
- ¾” T&G Advantech subfloor sheathing
Interior Wall Framing Material
- 2x load-bearing partition framing
Hybrid Conventional Second-Floor Level Materials with Timber Support Beams
- 2x floor joists, metal joist hangers, bridging, construction adhesive
- ¾” T&G Advantech® subfloor sheathing
Conventional Exterior Wall Materials
- 2×6 exterior framed walls (2×4 or 2×6 framing for garages)
- 7/16” wall sheathing with vapor barrier • Diamond Kote® siding / trim
Alternative Exterior Wall and Trim Materials
- 7/16” ZIP System® wall sheathing
- Murus SIP Panels (R-23)
- Low-E vapor barrier for framed exterior walls (R-4.17)
- James Hardie™ siding / trim
- Central States® Panel-Loc Plus™ Prime metal wall panels / trim
- Kiln-dried pine log siding with 1 ¾”x trim
Exterior Windows, Doors & Skylights
- Andersen® 100 Series windows and patio doors with screens, hardware
- Therma-Tru® entry doors and Schlage hardware
- Velux® operating skylights
Alternative Windows & Doors
- Andersen® 200, 400 and A-Series products
- Weather Shield® or Pella® products
Timber Frame Roof Materials
- 5/4 Triple / Double Shadow T&G pine ceiling paneling, synthetic felt paper below rigid insulation of timber rafter/truss roof system
- (2) layers R-40 rigid insulation
- 2x pine fascia / 1x sub-fascia
Alternative Insulating Roof Materials
- Murus® SIP panels (R-value as per code)
- (2) layers R-54 rigid insulation
Conventional Roof Framing Materials as Applicable
- Pre-manufactured roof / gable-end trusses / 2x rafters / 2x ceiling joists / 2x ladder rake
Hybrid Conventional Roof Framing Materials
- Pre-manufactured roof / gable-end trusses / 2x rafters / 2x ceiling joists / 2x ladder rake
Conventional Roof Materials
- 1/2” Plywood roof sheathing with H-clips
- Synthetic roofing underlayment
- Central States® Horizon-Loc™ Prime metal roof panels / trim
- 5/4 Triple / Double Shadow T&G pine soffit paneling
- 2x pine fascia / 1x sub-fascia
Alternative Conventional Roof Framing Materials
- 1/2” ZIP System® roof sheathing
- Tamko® Lifetime Heritage® / Titan XT® Architectural shingles
- 1×8 T&G pine soffit paneling
Porch Roof Materials
- Composition roof over timber frame porch systems
- 5/4 Triple / Double Shadow T&G pine ceiling (first layer)
- ¾” T&G roof sheathing (second layer)
- 4×8/6×6/6×8/8×8 support posts / angle braces
- Central States® Horizon-Loc™ Prime metal roof panels / trim
Alternative Porch Roof Materials
- Kiln-dried pine or PT 8” round posts
- Handcrafted 8” round posts (White Cedar or Lodgepole Pine)
- Tamko® Lifetime Heritage® / Titan XT® Architectural shingles
- 1×8 T&G pine roof decking / ceiling finish
- 2×6 T&G pine roof decking / ceiling finish
Conventional Porch Floor Framing Materials
- PT 2x floor joists, headers, metal joist hangers
Finish Materials Package
Interior Finish Materials
- 2x non-load-bearing partition framing
- R-21 fiberglass insulation for exterior framed walls
- Solid wood, 3-panel pine interior doors with hardware
- 1x interior pine trim for windows, exterior doors and interior doors
- 1 ¾”x interior pine windowsills, 1x pine baseboard
Alternative Interior Finish Materials
- Solid wood, raised-panel pine interior doors with hardware
- Solid wood, ‘V’-Groove pine interior doors with hardware
- Sliding Barn Door (Kit)
- 1×8 T&G Wall / Ceiling Finish
- 1×10 or 1×12 Circle Sawn Skip Dressed (Board or Shiplap available)
- Xtrodinair® fireplace with venting components
Loft/Stair System and Rail Materials
- 2×6 pine T&G landing flooring over timber / conventional floor systems
- Finish: 2×12 stringers, 2x pine treads, 1x pine risers
- Kiln-dried pine 6×6 Traditional or engineered posts, 2×6 /2×4 top rail, cable railing
Alternative Loft / Stair System and Rail Materials
- Composition floor over timber / conventional floor systems
- 1×8 T&G pine subfloor (first layer)
- ¾” T&G subfloor (second layer)
- Exposed Pine Timber Stair: 4×12 stringers, 4x treads
- Exposed Pine Timber Pegged Stair: 4×12 stringers, 4x mortise & tenon pegged treads
- Handcrafted Lodgepole Pine Log Stairs: log stringers, ½ log treads
- Kiln-dried pine 8” milled round posts, 4 ½” round railing, 2” round balusters
- Handcrafted Lodgepole Pine 8” round posts, 4 ½” round railing, 3” round balusters
- Metal balusters
- 2×2 pine balusters
Conventional Roof System as Applicable
- 5/4 Triple / Double Shadow T&G pine interior ceiling
- Insulation baffle board, plastic vapor barrier
- R-38 unfaced fiberglass insulation
Hybrid Conventional Roof
- 5/4 Triple / Double Shadow T&G pine interior ceiling finish
- Insulation baffle board, plastic vapor barrier
- R-38 or R-49 unfaced fiberglass insulation
Hybrid Conventional Porch Roof
- 5/4 Triple / Double Shadow T&G pine ceiling finish
Deck/Balcony materials
- Kiln-dried pine or PT 6×6 posts
- Kiln-dried pine or PT 2×6 / 2×4 top rail, cable railing
- PT 2x floor joists, headers, metal joist hangers
- PT 5/4 flooring
Alternative Deck / Balcony / Porch Floor & Rail System
- Composite decking and railing products (TimberTech®, Azek®, or Trex®)
- Kiln-dried pine or PT 8” round posts, 4 ½” round railing, 2” round balusters
- Handcrafted 8” round posts, 4 ½” round railing, 3” round balusters (White Cedar or Lodgepole Pine)
- Metal balusters
- 2×2 pine balusters
Sansin® SDF-1 & SDF-2 Exterior Stain Preservative (as applicable)
Package Notes
- Material components as high-lighted reflect the starting standards for log home packages.
- Material components as high-lighted reflect the starting standards for Hybrid packages. Additional Timber Frame components can be integrated into the Hybrid packages based on the desired aesthetic.
- No insulation supplied for the underside of the first floor system.
- All materials supplied as applicable based on desired Timber Frame or Hybrid Home design.
- Specifications may vary based on design, structural requirements, local building codes, etc
